Our High Clearance Lower Radius Rods for the WildCat 1000 will bolt right up to your machine just like the factory ones do. You will get enough clearance with these to not get stuck on anything in the trail. Also, there is no risk of bending them since they are tucked up out of the way. If by chance you do hit them on something, no worries! they are built out of super strong 1-1/4" DOM tubing with a whopping 3/16" wall thickness. Add that to the Chromoly Hiem Joint Rod Ends, and you have a top notch product keeping you out of the shop and on the trail where you belong. Comes in raw steel finish with new grade 8 hardware. Note: Drilling the factory holes out is required. Our hardware is oversized compared to the factory hardware and will require to open the holes in the knuckle up slighty.